Henan Feima Crane Co., Ltd.
Henan Feima Crane Co., Ltd. Quality Comes First and Customer-Oriented
Add to Cart
Indoor 10 Ton Single Beam Overhead Crane For Factory Workshop / Plant
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we provide are not only the electric protective devices or alarm bell but also other equipments as follows
1.Weight overload protection device.
2.Top quality long time bearing polyurethane materials buffer.
3.Crane travelling limit switch.
4. Voltage lower protection function.
5. Emergency stop system.
6.Current overload protection system
LB type explosion proof electric single girder crane
The single beam crane is small lifting capacity and travel along high I-Steel track.
Features:
tight dimension, low building headroom, light dead weight and light wheel load. It is a light duty track traveling crane with trajectory which applies to and used at machinery, assembling sites and warehouses.
This product adopts ground control and works at a temperature of -25--40 centigrade. It is prohibited to use the equipment at combustible, explosive or corrosive environment.
The crane applies to works and storehouses where it is ≥100 mm height between the rail surface and the rafter of roof truss.
The trolley forms a set with electric hoist, The mechanism of crane is nimble, with safe and reliable motion. It is capable of designing and making non-standard hoisting equipment.
The capacity: 1T, 2T, 3T, 5T,10T,16T 20T; Span from 7.5m to 28.5m
Single Girder Overhead Crane Drawing
| Lifting capacity (T) | 1, 2, 3, 5, 10T | 16, 20T | |||||||||||
| Span(M) | 7.5-22.5M | ||||||||||||
| Crane traveling mechanism | Traveling speed(m/min) | 20 | 30 | 45 | 60 | 75 | 20 | ||||||
| Reducer ratio | 58.78 | 39.38 | 26.36 | 19.37 | 15.88 | 58.78 | |||||||
| Motor | Model | ZDY21-4 | ZDY21-4 | ZDY122-4 | |||||||||
| Power(kw) | 2× 0.8 | 2× 1.5 | 1.5× 2 | ||||||||||
| Rotation (m/min) | 1380 | 1380 | |||||||||||
| Lifting mechanism (electric hoist)& electric hoist traveling mechanism |
Electric hoist model | CD1/MD1 | MD1/HC | ||||||||||
| Lifting speed (m/min) | 8, 8/0.8 7, 7/0.7 | 3.5 3.5/0.35 | |||||||||||
| Lifting height (m) | 6, 9, 12, 18, 24, 30 | 12, 18, 24, 30 | |||||||||||
| Traveling speed (m/min) | 20(30) | 20(30) | |||||||||||
| Motor | Taper Squirrel-cage type | Taper Squirrel-cage type | |||||||||||
| Work duty | A3-A5 | ||||||||||||
| Power supply | 380V 50HZ three phase | ||||||||||||
| Wheel diameter | 270mm | 370mm | |||||||||||
| Width of trail | 37-70mm | 37-70mm | |||||||||||